Part Details | SHOULDERED SHAFT
3040-01-284-7434 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6110152 ITEM 8, 6110-152 ITEM 8, 5202547 ITEM 8, 6110152 ITEM 8, 6110-152 ITEM 8, 5202547 ITEM 8, 5202547, 3040-01-284-7434, 01-284-7434, 3040012847434, 012847434
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 30, 1988 | 01-284-7434 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
SPLINED (STRAIGHT)
CIRCULAR GROOVED
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-284-7434
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6110-152 ITEM 8 | 43689 | HUNTINGTON INGALLS INCORPORATEDDIV NEWPORT NEWS |
| 5202547 ITEM 8 | 43689 | HUNTINGTON INGALLS INCORPORATEDDIV NEWPORT NEWS |
| 6110-152 ITEM 8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5202547 ITEM 8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5202547 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-284-7434
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.2500 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 1.125 INCHES NOMINAL |
| FIRST END DIAMETER | 1.3770 INCHES MINIMUM AND 1.3776 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 1.2480 INCHES MINIMUM AND 1.2570 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 1.250 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.0640 INCHES MINIMUM AND 1.0690 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.2460 INCHES MINIMUM AND 1.2480 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 1.562 INCHES NOMINAL |
| OVERALL LENGTH | 8.000 INCHES NOMINAL |
| STEP QUANTITY | 7 |