Part Details | SHOULDERED SHAFT
3040-01-284-8199 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6016117 ITEM 4, 7046016117 ITEM 4, 704-6016117 ITEM 4, 6016117, 3040-01-284-8199, 01-284-8199, 3040012848199, 012848199
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 01, 1988 | 01-284-8199 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-284-8199
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6016117 ITEM 4 | 43689 | HUNTINGTON INGALLS INCORPORATEDDIV NEWPORT NEWS |
| 704-6016117 ITEM 4 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 6016117 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-284-8199
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | 8$9 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CLASS A FED SPEC ALL MATERIAL RESPONSES |
| FIRST END DIAMETER | 2.1250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 1.9970 INCHES MINIMUM AND 1.9990 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 2.000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.6960 INCHES MINIMUM AND 1.7110 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.9930 INCHES MINIMUM AND 1.9940 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 2.125 INCHES NOMINAL |
| OVERALL LENGTH | 7.750 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 2ND END HAS INT THD HOLE,1/4-20UNC-2B BY 0.750 IN.DP |