Part Details | SHOULDERED SHAFT
3040-01-294-5035 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5541870, 3040-01-294-5035, 01-294-5035, 3040012945035, 012945035
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 16, 1989 | 01-294-5035 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
SPLINED (STRAIGHT)
FLAT KEYWAY
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-294-5035
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5541870 | 81039 | WHIPPANY ACTUATION SYSTEMS LLC |
Technical Data | NSN 3040-01-294-5035
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6417 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.2080 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.620 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.1875 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.2080 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 9 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0600 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.0890 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.245 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.185 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3125 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.3438 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 0.440 INCHES NOMINAL |
| OVERALL LENGTH | 2.175 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| END ITEM IDENTIFICATION | B1B ACFT FLIGHT CONTROL |