Part Details | SHOULDERED SHAFT
3040-01-296-6904 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5468199, 54680035, 5468003-5, 3040-01-296-6904, 01-296-6904, 3040012966904, 012966904
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 23, 1989 | 01-296-6904 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-296-6904
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5468199 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5468003-5 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-296-6904
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0930 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1500 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.4820 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2480 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 2.062 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | IST END HAS INTERNAL HOLE BORED INTO END,0.375 IN.DIA BY 0.312 IN.DP;1ST END HAS PARTIAL SLOT ON ONE SIDEWALL,0.188 IN.WIDE BY 0.288 IN.DP |