Part Details | SHOULDERED SHAFT
3040-01-297-0281 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 52199171, 5219917-1, 52199172, 5219917-2, 52199171, 5219917-1, 5219917, 521152199171, 52115219917-1, 3040-01-297-0281, 01-297-0281, 3040012970281, 012970281
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 27, 1989 | 01-297-0281 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-297-0281
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5219917-1 | 38597 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 5219917-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5219917-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5219917 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 52115219917-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-297-0281
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4990 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4780 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.0890 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7300 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.7300 INCHES NOMINAL |
| OVERALL LENGTH | 2.6510 INCHES NOMINAL |
| STEP QUANTITY | 2 |