Part Details | SHOULDERED SHAFT
3040-01-301-4654 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 03428380Y, 034-28380-Y, 01408173W PIECE 6, 014-08173W PIECE 6, 3040-01-301-4654, 01-301-4654, 3040013014654, 013014654
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 29, 1989 | 01-301-4654 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-301-4654
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 034-28380-Y | 9F512 | PARKER-HANNIFIN CORPORATIONDBA HYDRAULIC PUMP DIVISION |
| 014-08173W PIECE 6 | 9F512 | PARKER-HANNIFIN CORPORATIONDBA HYDRAULIC PUMP DIVISION |
Technical Data | NSN 3040-01-301-4654
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.3120 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| END ITEM IDENTIFICATION | PUMP RTY PWR |