Part Details | SHOULDERED SHAFT
3040-01-306-9271 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 22286, 22286, 3040-01-306-9271, 01-306-9271, 3040013069271, 013069271
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 01, 1989 | 01-306-9271 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-306-9271
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 22286 | 27647 | WARN INDUSTRIES INC |
| 22286 | 27646 | WARN INDUSTRIES, INC.DBA WARN |
Technical Data | NSN 3040-01-306-9271
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 4130 |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0600 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.9400 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.100 INCHES NOMINAL |
| FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.1170 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.800 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.0138 INCHES MINIMUM AND 1.0171 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.1170 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 1.0833 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 26 |
| LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL |
| OVERALL LENGTH | 3.800 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | FIRST END HAS INTERNAL HEXAGON FLATS |
| END ITEM IDENTIFICATION | 3930-01-275-6420 |