Part Details | SHOULDERED SHAFT
3040-01-307-2504 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 100290791, 10029079-1, 3040-01-307-2504, 01-307-2504, 3040013072504, 013072504
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 08, 1989 | 01-307-2504 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-307-2504
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10029079-1 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-01-307-2504
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A322 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.3600 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.6235 INCHES NOMINAL |
| OVERALL LENGTH | 9.8000 INCHES NOMINAL |
| STEP QUANTITY | 11 |
| SPECIAL FEATURES | SHAFT HAS SPLINES ON BOTH ENDS,FIRST END SPLINE HAS 19 TEETH,AND A PRESS. ANGLE OF 30 DEG.,PITCH DIA. 0.5938.SECOND END HAS 15 TEETH,PRESS. ANGLE OF 30 DEG.,PITCH DIA. 0.4688 IN. |
| END ITEM IDENTIFICATION | ACCESS UNIT LOADING,AMMO FOR THE F-15 ACFT |