Part Details | SHOULDERED SHAFT
3040-01-311-4153 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 878321651A ITEM 10, 87832-1651A ITEM 10, 878321651A, 87832-1651A, 7096129500 ITEM 10, 709-6129500 ITEM 10, 7096129500, 709-6129500, 3040-01-311-4153, 01-311-4153, 3040013114153, 013114153
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 28, 1989 | 01-311-4153 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-311-4153
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 87832-1651A ITEM 10 | 96169 | ELECTRIC BOAT CORPORATION |
| 87832-1651A | 96169 | ELECTRIC BOAT CORPORATION |
| 709-6129500 ITEM 10 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 709-6129500 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-311-4153
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 PLAIN |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL304,COND B FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.5000 INCHES NOMINAL |
| FIRST END WIDTH ACROSS FLATS | 0.6220 INCHES NOMINAL |
| FIRST END STEP LENGTH | 1.2500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 1.3800 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2810 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.4400 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL |
| OVERALL LENGTH | 8.310 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END 2 FLATS 180 DEGREES APART |