Part Details | SHOULDERED SHAFT
3040-01-311-5591 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 4G33076101A, 4G33076-101A, 3040-01-311-5591, 01-311-5591, 3040013115591, 013115591
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 01, 1989 | 01-311-5591 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-311-5591
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4G33076-101A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-01-311-5591
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL COMP 4130 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.1900 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.6223 INCHES NOMINAL |
| OVERALL LENGTH | 5.720 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | LARGEST STEP HAS A THREE LEGGED FAN,EACH LEG HAS A HOLE AT THE END 0.3754 IN. DIA,HOLES ARE 1.061 IN. APART CENTER TO CENTER |
| END ITEM IDENTIFICATION | DRIVE ARM,MLG SLOT DOOR FOR THE C5B ACFT |