Part Details | SHOULDERED SHAFT
3040-01-321-5034 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 4071013, 4071013, 3040-01-321-5034, 01-321-5034, 3040013215034, 013215034
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 19, 1990 | 01-321-5034 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-321-5034
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4071013 | 52661 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT & WHITNEY |
| 4071013 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 3040-01-321-5034
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.8600 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.8305 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.6150 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.5810 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.6600 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.7500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 21 |
| LARGEST STEP DIAMETER | 1.8305 INCHES NOMINAL |
| OVERALL LENGTH | 11.273 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | FIRST END HAS EXTERNAL SPLINE 0.150 IN. FROM END,19 TEETH,PRES. ANGLE 30.0 DEG. |
| END ITEM IDENTIFICATION | F100PW0229 ENGINE |