Part Details | SHOULDERED SHAFT
3040-01-332-8872 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 828571, 82857-1, 3040-01-332-8872, 01-332-8872, 3040013328872, 013328872
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 18, 1991 | 01-332-8872 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLAT KEYWAY
TAPERED WITH FLAT
FLAT KEYWAY
Cross Reference | NSN 3040-01-332-8872
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 82857-1 | 02101 | OECO, LLCDBA PACIFIC SCIENTIFIC OECO |
Technical Data | NSN 3040-01-332-8872
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | TAPERED WITH FLAT |
| MATERIAL | STEEL |
| FIRST END TAPER MAJOR DIAMETER | 0.4320 INCHES NOMINAL |
| FIRST END TAPER LENGTH | 0.1700 INCHES NOMINAL |
| FIRST END FLAT DEPTH | 0.0590 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 0.1860 INCHES NOMINAL |
| FIRST END ANGLE BETWEEN KEYWAYS | 45.0 DEGREES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE DIAMETER | 0.1960 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 1.0330 INCHES NOMINAL |
| SECOND END DIAMETER | 0.8550 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.7500 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.0625 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8550 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 0.978 INCHES NOMINAL |
| OVERALL LENGTH | 6.500 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | TAPERED END I/D 0.188 IN.;INCLUDES DRILLED HOLE ON SIDE;SPLINE END HOLE I/D 0.531 IN.;ACFT MODEL HH65A AC GENERATOR,P/N 82562-7 |