Part Details | SHOULDERED SHAFT
3040-01-333-1510 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5819879, 3040-01-333-1510, 01-333-1510, 3040013331510, 013331510
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 25, 1991 | 01-333-1510 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-333-1510
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5819879 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-333-1510
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.2350 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2580 INCHES MINIMUM AND 0.2663 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 32.0000 INCHES MINIMUM AND 64.0000 INCHES MAXIMUM |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 1.600 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| END ITEM IDENTIFICATION | AFTERBODY SECTION,TORPEDO MK50 |