Part Details | SHOULDERED SHAFT
3040-01-338-5893 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 58648, 3040-01-338-5893, 01-338-5893, 3040013385893, 013385893
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 07, 1991 | 01-338-5893 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-338-5893
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 58648 | 93835 | PARKER-HANNIFIN CORPORATIONDBA HYDRAULIC SYSTEMS DIVISION |
Technical Data | NSN 3040-01-338-5893
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 CLASS 17-4PH ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.474 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.3250 INCHES MINIMUM AND 0.3340 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | IDENTICAL |
| SECOND END DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.637 INCHES MINIMUM AND 0.663 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.3950 INCHES MINIMUM AND 0.4040 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.4580 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.279 INCHES NOMINAL |
| OVERALL LENGTH | 1.465 INCHES NOMINAL |
| STEP QUANTITY | 1 |