Part Details | SHOULDERED SHAFT
3040-01-340-4280 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 699402, 69-9402, 3040-01-340-4280, 01-340-4280, 3040013404280, 013404280
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 12, 1991 | 01-340-4280 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-340-4280
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 69-9402 | 81205 | THE BOEING COMPANYDBA BOEING |
Technical Data | NSN 3040-01-340-4280
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268,T4 TEMPER FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.9600 INCHES MINIMUM |
| FIRST END SPLINE LENGTH | 2.010 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.6764 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.8125 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 13 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 1.180 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| OVERALL LENGTH | 8.700 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIFICATION/STANDARD DATA | 81205-69-9402 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |