Part Details | SHOULDERED SHAFT
3040-01-348-8027 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 38807261, 3880726-1, 3880726, 3040-01-348-8027, 01-348-8027, 3040013488027, 013488027
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 16, 1991 | 01-348-8027 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-348-8027
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3880726-1 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 3880726 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-348-8027
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4550 INCHES MINIMUM AND 0.4650 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.4991 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1603 INCHES MINIMUM AND 0.1613 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1880 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.681 INCHES MINIMUM AND 0.691 INCHES MAXIMUM |
| OVERALL LENGTH | 2.100 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | 1ST END INT SPLINED,9 TEETH,32/64 PITCH,30 DEG PRESSURE ANGLE,0.3125 IN.MAJ DIA,SPLINES BEGIN 0.285 IN.FROM END |