Part Details | SHOULDERED SHAFT
3040-01-357-3464 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7504091, 750409-1, 750409, 3040-01-357-3464, 01-357-3464, 3040013573464, 013573464
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 21, 1992 | 01-357-3464 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TONGUE
TAPERED WITH FLAT
TONGUE
Cross Reference | NSN 3040-01-357-3464
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 750409-1 | 21562 | GENERAL DYNAMICS OTS (AEROSPACE),INC. |
| 750409 | 21562 | GENERAL DYNAMICS OTS (AEROSPACE),INC. |
Technical Data | NSN 3040-01-357-3464
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 9 TAPERED WITH FLAT |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,303S FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END FLAT DEPTH | 0.0610 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 0.2500 INCHES NOMINAL |
| FIRST END DIAMETER | 0.4950 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.6200 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 TONGUE |
| SECOND END DIAMETER | 0.7100 INCHES MINIMUM AND 0.7200 INCHES MAXIMUM |
| SECOND END SLOT DEPTH | 0.4000 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.1560 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1250 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.710 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| OVERALL LENGTH | 4.870 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 1ST END HAS 2ND FLAT,180 DEG FROM 1ST FLAT;2ND END HAS FLAT,0.100 IN.DP BY 1.430 IN.LG,RUNNING PERPENDICULAR TO SLOT |