Part Details | SHOULDERED AXLE
3040-01-366-3832 An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 326217, 326217, 3040-01-366-3832, 01-366-3832, 3040013663832, 013663832
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 24, 1992 | 01-366-3832 | 40525 ( AXLE, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-366-3832
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 326217 | 30076 | HYSTER-YALE GROUP, INC. |
| 326217 | 04627 | HYSTER-YALE GROUP, INC. |
Technical Data | NSN 3040-01-366-3832
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FIRST END STYLE | 8 PLAIN |
| FIRST END DIAMETER | 37.53 MILLIMETERS NOMINAL |
| FIRST END SPLINE LENGTH | 47.0 MILLIMETERS NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 34.14 MILLIMETERS NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 38.0 MILLIMETERS NOMINAL |
| FIRST END PITCH DIAMETER | 36.512 MILLIMETERS NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 23 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DIAMETER | 102.0 MILLIMETERS NOMINAL |
| LARGEST STEP DIAMETER | 168.0 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 422.0 MILLIMETERS NOMINAL |
| STEP QUANTITY | 3 |
| END ITEM IDENTIFICATION | 3930-01-344-1088 |