Part Details | SHOULDERED SHAFT
3040-01-368-6512 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 17P2C11041, 17P2C1104-1, 3040-01-368-6512, 01-368-6512, 3040013686512, 013686512
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 05, 1992 | 01-368-6512 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-368-6512
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 17P2C1104-1 | 88277 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 3040-01-368-6512
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 1.3700 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.2790 INCHES MINIMUM AND 0.2910 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5750 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| SECOND END DIAMETER | 1.3700 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.2790 INCHES MINIMUM AND 0.2910 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.5750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.4275 INCHES NOMINAL |
| OVERALL LENGTH | 25.000 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SHAFT,OUTBD DOOR LINK-V BRACE,UPR,MLG;SECOND STEP 1S LOCATED 3.30 INCHES FROM FIRST END WITH A DIAMETER OF 1.4275 INCHES MINIMUM AND 1.4290 MAXIMUMAND A LENGTH OF 1.45 INCHES.THE FIRST AND THIRD AND FIFTH STEP HAVE A DIAMETER OF 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM. THE FIRST STEP IS 3.30 INCHES LONG,THE THIRD STEP IS 14.75 IINCHES LONG AND THE FIFTH STEP IS 3.30INCHES LONG. THE FOURTH STEP HAS A HOLE DRILLED THROUGH ITS CENTER WITH THE SAME DIMENSION AS THE HOLES IN STEPS ONE AND FIVE |
| END ITEM IDENTIFICATION | C-17 ACFT |