Part Details | SHOULDERED SHAFT
3040-01-377-4000 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6113610, 3040-01-377-4000, 01-377-4000, 3040013774000, 013774000
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 15, 1993 | 01-377-4000 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-01-377-4000
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6113610 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-377-4000
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 4140 |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.5860 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.1200 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4860 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.5810 INCHES MINIMUM |
| FIRST END PITCH DIAMETER | 0.5500 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 11 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 FLATTED |
| SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.1901 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.4540 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.8400 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.0940 INCHES NOMINAL |
| SECOND END DIAMETER | 1.3750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.5790 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.7810 INCHES MAXIMUM |
| OVERALL LENGTH | 5.8850 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END THREADS ARE 1.375-18NEF-2A |