Part Details | SHOULDERED SHAFT
3040-01-381-8591 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 246828, 3040-01-381-8591, 01-381-8591, 3040013818591, 013818591
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 23, 1993 | 01-381-8591 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-381-8591
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 246828 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
Technical Data | NSN 3040-01-381-8591
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 1.9950 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.9320 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.8800 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.7380 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.9350 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.8750 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 30 |
| LARGEST STEP DIAMETER | 3.375 INCHES NOMINAL |
| OVERALL LENGTH | 27.375 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| END ITEM IDENTIFICATION | 3930-01-307-3658 |