Part Details | SHOULDERED SHAFT
3040-01-383-5102 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0257071, 025707-1, 0257071, 025707-1, 3040-01-383-5102, 01-383-5102, 3040013835102, 013835102
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 25, 1993 | 01-383-5102 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-383-5102
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 025707-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
| 025707-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC.DBA MEGGITT WESTERN DESIGN |
Technical Data | NSN 3040-01-383-5102
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.2480 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.5800 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.4985 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 10.000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.4140 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4995 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.4688 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 15 |
| LARGEST STEP DIAMETER | 0.4995 INCHES NOMINAL |
| OVERALL LENGTH | 11.020 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END HAS HELICAL COIL INSERT,THREADS .190-32UNF-2B;FIRST END EXTERNAL THREADS ARE .375-24UNF-2B 1.630 IN. FROM THE END |