Part Details | SHOULDERED SHAFT
3040-01-383-5253 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 801640670955, 801-6406709-55, 8016406709, 801-6406709, 6406709, 211052706, 3040-01-383-5253, 01-383-5253, 3040013835253, 013835253
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 25, 1993 | 01-383-5253 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-383-5253
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 801-6406709-55 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 801-6406709 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 6406709 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 211052706 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-383-5253
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5622 TY 1 COND-H1075 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.9992 INCHES MINIMUM AND 0.9997 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.8490 INCHES MINIMUM AND 0.8540 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 1.812 INCHES NOMINAL |
| OVERALL LENGTH | 6.870 INCHES NOMINAL |
| STEP QUANTITY | 3 |