Part Details | SHOULDERED SHAFT
3040-01-383-5736 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0255571, 025557-1, 0255571, 025557-1, 3040-01-383-5736, 01-383-5736, 3040013835736, 013835736
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 25, 1993 | 01-383-5736 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-383-5736
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 025557-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
| 025557-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC.DBA MEGGITT WESTERN DESIGN |
Technical Data | NSN 3040-01-383-5736
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 4140 |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7400 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.7900 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.5080 INCHES MINIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.5902 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.5625 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 18 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.1000 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4320 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.6090 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.6090 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.7400 INCHES NOMINAL |
| OVERALL LENGTH | 2.7900 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | THREADS ARE 1/2-20UNF-2A |