Part Details | SHOULDERED SHAFT
3040-01-384-0918 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12389324, 3040-01-384-0918, 01-384-0918, 3040013840918, 013840918
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 08, 1993 | 01-384-0918 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-384-0918
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12389324 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-384-0918
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| FIRST END DIAMETER | 0.4940 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.6300 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4491 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.4687 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 15 |
| END SIMILARITY | NOT IDENTICAL |
| LARGEST STEP DIAMETER | 2.8600 INCHES NOMINAL |
| OVERALL LENGTH | 2.5200 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | SECOND END HAS 2 EA LOBES .247 IN.DIA;FIRST END SPLINE HAS A TOOTH MISSING |
| END ITEM IDENTIFICATION | 2520-01-338-2703 |