Part Details | SHOULDERED SHAFT
3040-01-411-8473 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12364824, 12364824, 12364824, 3040-01-411-8473, 01-411-8473, 3040014118473, 014118473
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 03, 1995 | 01-411-8473 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-411-8473
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12364824 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12364824 | 06085 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12364824 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-411-8473
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | 0$DST1045 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.4549 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.630 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.3536 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.4549 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 34 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 1.4549 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.510 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.3536 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.4549 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 34 |
| LARGEST STEP DIAMETER | 1.4995 INCHES NOMINAL |
| OVERALL LENGTH | 13.120 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | BOTH ENDS GROOVED, FIRST END SPLINES 0.180 IN. FROM END, SECOND END SPLINES 0.170 IN. FROM END, FINISH CADMIUM PLATE TYPE II, CLASS 2 PER SPEC QQ-P-416 |
| END ITEM IDENTIFICATION | 2350-01-390-4683 |