Part Details | SHOULDERED SHAFT
3040-01-412-2692 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: D204811G00157, D204811G001-57, D204811G001 ITEM 57, 8025773417 ITEM 57, 802-5773417 ITEM 57, 8025773417, 802-5773417, 3040-01-412-2692, 01-412-2692, 3040014122692, 014122692
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 14, 1995 | 01-412-2692 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
CIRCULAR GROOVED
FLATTED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-412-2692
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| D204811G001-57 | 98523 | JERED LLCDBA PAR |
| D204811G001 ITEM 57 | 98523 | JERED LLCDBA PAR |
| 802-5773417 ITEM 57 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 802-5773417 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-412-2692
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 440C |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0680 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 1.4680 INCHES MINIMUM AND 1.4730 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.250 INCHES NOMINAL |
| FIRST END DIAMETER | 1.5749 INCHES MINIMUM AND 1.5753 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | FLATTED |
| SECOND END DIAMETER | 1.5625 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.7188 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 1.1250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.7490 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| OVERALL LENGTH | 7.500 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | LOCTITE SHOULD BE USED AT THE ASSEMBLY OF PNS 58&103 TO COMPLETE ITEM 57,INTERNAL THREADS 3/4-10UNC-28 X 1 1/8 DEEP,ALSO TWO FLAT GROOVES ON SECOND END 5/16 IN. LG X 3/32 IN. X 3/32 IN. DEEP,180 DEGREES APART |