Part Details | SHOULDERED SHAFT
3040-01-413-8263 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5855361566 ITEM 3, 585-5361566 ITEM 3, 5855361566, 585-5361566, 3040-01-413-8263, 01-413-8263, 3040014138263, 014138263
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 23, 1995 | 01-413-8263 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
SPLINED (STRAIGHT)
TAPERED WITH FLAT
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-413-8263
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 585-5361566 ITEM 3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 585-5361566 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-413-8263
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | TAPERED WITH FLAT |
| MATERIAL | COPPER ALLOY 632 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END TAPER MAJOR DIAMETER | 0.6520 INCHES NOMINAL |
| FIRST END TAPER LENGTH | 0.2050 INCHES NOMINAL |
| FIRST END TAPER | 0.2350 PER FOOT IN INCHES |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.1200 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1870 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2500 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.1200 INCHES NOMINAL |
| OVERALL LENGTH | 5.5000 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN (688) |