Part Details | SHOULDERED SHAFT
3040-01-417-2709 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: DAA3116D153007, DAA3116D153-007, DAA3116D153, 3040-01-417-2709, 01-417-2709, 3040014172709, 014172709
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 03, 1995 | 01-417-2709 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
FLATTED
Cross Reference | NSN 3040-01-417-2709
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DAA3116D153-007 | 81205 | THE BOEING COMPANYDBA BOEING |
| DAA3116D153 | 81205 | THE BOEING COMPANYDBA BOEING |
Technical Data | NSN 3040-01-417-2709
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 1 FLATTED |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5659 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.2500 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.1210 INCHES MINIMUM AND 1.1310 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 1.0000 INCHES NOMINAL |
| FIRST END KEYWAY WIDTH | 0.2510 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 2.6800 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.1240 INCHES NOMINAL |
| FIRST END DIAMETER | 1.2480 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 1.5000 INCHES NOMINAL |
| OVERALL LENGTH | 22.3000 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | CROSS DRILLED HOLE THRU HUB ON BOTH ENDS, 0.176 IN. OD |
| END ITEM IDENTIFICATION | B2 BOMBER AIRCRAFT |