Part Details | SHOULDERED SHAFT
3040-01-424-4249 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: DF1502261 FN 63, DF1502-261 FN 63, 6404625 FIND 63L1, 1676404625 FIND 63L1, 167-6404625 FIND 63L1, DF1502261 FN 63L1, DF1502-261 FN 63L1, 6404625 FIND 63, 1676404625 FIND 63, 167-6404625 FIND 63, 3040-01-424-4249, 01-424-4249, 3040014244249, 014244249
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 28, 1996 | 01-424-4249 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-424-4249
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DF1502-261 FN 63 | 43689 | HUNTINGTON INGALLS INCORPORATEDDIV NEWPORT NEWS |
| 6404625 FIND 63L1 | 03950 | NAVAL INVENTORY CONTROL POINTMECHANICSBURG |
| 167-6404625 FIND 63L1 | 03950 | NAVAL INVENTORY CONTROL POINTMECHANICSBURG |
| DF1502-261 FN 63L1 | 03950 | NAVAL INVENTORY CONTROL POINTMECHANICSBURG |
| 6404625 FIND 63 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 167-6404625 FIND 63 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-424-4249
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | COPPER ALLOY |
| FIRST END DIAMETER | 1.1225 INCHES MINIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.1800 INCHES NOMINAL |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS |
| CRITICALITY CODE JUSTIFICATION | ZZZY |
| END ITEM IDENTIFICATION | HATCH,LOWER BRIDGE |