Part Details | SHOULDERED SHAFT
3040-01-432-9442 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 21703, 2170-3, 3040-01-432-9442, 01-432-9442, 3040014329442, 014329442
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 18, 1996 | 01-432-9442 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-432-9442
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2170-3 | 0ACY8 | PARKER-HANNIFIN CORPORATIONDIV HYDRAULIC PUMP/MOTOR DIVISION |
Technical Data | NSN 3040-01-432-9442
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END DIAMETER | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.000 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.7280 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 13 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.8300 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.7280 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8300 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 13 |
| OVERALL LENGTH | 8.266 INCHES NOMINAL |
| END ITEM IDENTIFICATION | HYDRAULIC MOTOR, PARKER-HANNIFIN CORP., 110A SERIES; W/S TARAWA CLASS LHA |