Part Details | SHOULDERED SHAFT
3040-01-434-0718 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 8136701, 81367-01, 81367, 3040-01-434-0718, 01-434-0718, 3040014340718, 014340718
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 18, 1996 | 01-434-0718 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-434-0718
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 81367-01 | 93322 | GE AVIATION SYSTEMS LLCDBA GE AVIATION |
| 81367 | 93322 | GE AVIATION SYSTEMS LLCDBA GE AVIATION |
Technical Data | NSN 3040-01-434-0718
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.0860 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 0.2500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 PLAIN |
| SECOND END DIAMETER | 0.1880 INCHES NOMINAL |
| SECOND END WIDTH ACROSS FLATS | 0.2190 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.1250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.1880 INCHES NOMINAL |
| OVERALL LENGTH | 0.650 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | HEX END HAS A CENTRALLY LOCATED DRILLED HOLE 0.060 IN. ID. |
| END ITEM IDENTIFICATION | HORNET, F/A18 |