Part Details | SHOULDERED SHAFT
3040-01-436-9056 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12364517, 12364517, 12364517, 3040-01-436-9056, 01-436-9056, 3040014369056, 014369056
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 30, 1996 | 01-436-9056 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-436-9056
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12364517 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12364517 | 06085 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12364517 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-436-9056
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 3.6840 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 1.2500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 3.4641 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 4.3100 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 3.7590 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 4.1240 INCHES MINIMUM AND 4.1670 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 4.0000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 4.2460 INCHES NOMINAL |
| OVERALL LENGTH | 15.140 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END THD HOLE 0.500-20UNF-2B, 1.25 DEEP AND 60 DEG CSK TO .620; THRU HOLE EACH END 0.250 IN. DIA X 0.625 DEEP W/0.750 IN. C TO C BETWEEN HOLES |
| END ITEM IDENTIFICATION | 2350-01-390-4683; W/S RECOVERY VEHICLE FU |