Part Details | SHOULDERED SHAFT
3040-01-441-0094 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 9226811, 922681-1, 922681, 3040-01-441-0094, 01-441-0094, 3040014410094, 014410094
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 30, 1997 | 01-441-0094 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-441-0094
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 922681-1 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 922681 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-441-0094
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6526 (HP9-4-30) ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7600 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.2218 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.288 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.9720 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.3800 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.8416 INCHES MINIMUM AND 0.8526 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.9720 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.9375 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 15 |
| LARGEST STEP DIAMETER | 0.9720 INCHES NOMINAL |
| OVERALL LENGTH | 1.038 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| END ITEM IDENTIFICATION | F16 AIRCRAFT |