Part Details | SHOULDERED SHAFT
3040-01-454-3124 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: N2320, N2271, 3040-01-454-3124, 01-454-3124, 3040014543124, 014543124
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 26, 1998 | 01-454-3124 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-454-3124
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| N2320 | 09176 | PARKER-HANNIFIN CORPORATIONDBA PNEUMATIC NORTH AMERICA |
| N2271 | 09176 | PARKER-HANNIFIN CORPORATIONDBA PNEUMATIC NORTH AMERICA |
Technical Data | NSN 3040-01-454-3124
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLAT KEYWAY |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A564,TY630 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END KEYWAY WIDTH | 0.5000 INCHES NOMINAL |
| FIRST END EXTERNAL KEYWAY LENGTH | 3.7600 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.2500 INCHES NOMINAL |
| FIRST END DIAMETER | 2.2490 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 2.3010 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 4.2500 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.1510 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.3010 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 36 |
| LARGEST STEP DIAMETER | 3.1820 INCHES NOMINAL |
| OVERALL LENGTH | 39.4500 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| END ITEM IDENTIFICATION | SEAWOLF CLASS SSN |