Part Details | SHOULDERED SHAFT
3040-01-469-0399 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 20457193, 2045719-3, 20457193, 2045719-3, 3040-01-469-0399, 01-469-0399, 3040014690399, 014690399
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 01, 1999 | 01-469-0399 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-469-0399
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2045719-3 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 2045719-3 | 0ZWK8 | MOOG INC.DBA MOOG AIRCRAFT GROUP TORRANCE |
Technical Data | NSN 3040-01-469-0399
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-47230 MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 2.820 INCHES MINIMUM AND 2.840 INCHES MAXIMUM |
| SPECIAL FEATURES | INTERNAL SPLINE DATA - THERE ARE 25 TEETH; PRESSURE ANGLE IS 30 DEG; TYPE IS FLAT ROOT SIDE FIT-CLASS 1; MEASUREMENT BETWEEN .072 DIA PINS TO .9405 MAX; CIRCULAR SPACE WIDTH WITH GAGE IS .0654 MIN EFFECTIVE |
| END ITEM IDENTIFICATION | 1650-01-122-6948 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | COUPLING, SHAFT |