Part Details | SHOULDERED SHAFT
3040-01-469-1163 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12462887, 12462887, 3040-01-469-1163, 01-469-1163, 3040014691163, 014691163
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 03, 1999 | 01-469-1163 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-469-1163
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12462887 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12462887 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-469-1163
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 304 |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 1.7500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 1.7500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.5200 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.7150 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.7500 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 13 |
| LARGEST STEP DIAMETER | 1.7500 INCHES NOMINAL |
| OVERALL LENGTH | 7.613 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | NHA POWER TAKEOFF TRANSMISSION;END ITEM CARGO CARRIER 2350-01-456-7884;FIRST END IS QUILLED; HEAT TREATMENT REQUIRED: QUENCH AND TEMPER TO ROCKWELL C32 THRU C36; SHOT PEEN ENTIRE PART TO AN INTENSITY OF .007A TO .014A PER MIL-S-13165 EXCEPT AREAS DESIGNATED; PHOSPHATE COAT ALL SURFACES PER SPEC DOD-P-16232, TYPE M, CLASS 2, WAIVE ABRASIVE BLAST REQUIREMENTS;USING NON-ACID BASE WHITE INK FOR MARKING |
| END ITEM IDENTIFICATION | BRADLEY |