Part Details | SHOULDERED SHAFT
3040-01-476-0237 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 13419312, 3040-01-476-0237, 01-476-0237, 3040014760237, 014760237
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 22, 2000 | 01-476-0237 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-476-0237
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13419312 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 3040-01-476-0237
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 TYPE 304 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 2.90 MILLIMETERS MINIMUM AND 3.10 MILLIMETERS MAXIMUM |
| FIRST END GROOVE DIAMETER | 15.95 MILLIMETERS MINIMUM AND 16.05 MILLIMETERS MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 2.9 MILLIMETERS MINIMUM AND 3.1 MILLIMETERS MAXIMUM |
| FIRST END DIAMETER | 19.90 MILLIMETERS MINIMUM AND 20.10 MILLIMETERS MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| LARGEST STEP DIAMETER | 19.9 MILLIMETERS MINIMUM AND 20.1 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 56.0 MILLIMETERS MINIMUM AND 57.0 MILLIMETERS MAXIMUM |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | 1ST END INTERNAL 8.0 X 8.0 MM HEX HOLE; 2ND END 11.8 MM SPHERE; THREADED CENTER STEP 0.750-16 UNF 2A; PASSIVATE SURFACE FINISH IAW QQ-P-35 TYPE II |
| END ITEM IDENTIFICATION | MULTI-LAUNCH ROCKET SYSTEM |