Part Details | SHOULDERED SHAFT
3040-01-476-1610 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 13419307, 3040-01-476-1610, 01-476-1610, 3040014761610, 014761610
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 28, 2000 | 01-476-1610 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-476-1610
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13419307 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 3040-01-476-1610
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 TYPE 304 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 10.90 MILLIMETERS MINIMUM AND 11.10 MILLIMETERS MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | INTERNAL THREADED |
| SECOND END DIAMETER | 15.30 MILLIMETERS MINIMUM AND 16.30 MILLIMETERS MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 24.5 MILLIMETERS MINIMUM AND 25.5 MILLIMETERS MAXIMUM |
| LARGEST STEP DIAMETER | 15.3 MILLIMETERS MINIMUM AND 16.3 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 195.5 MILLIMETERS MINIMUM AND 196.5 MILLIMETERS MAXIMUM |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | PASSIVATE IAW QQ-P-35 TYPE II; NOTCH 1.0 MM DEEP 15.0 MM FROM 1ST END TO 2.5 MM DEEP 25.0 MM FROM 1ST END; WOODRUFF KEY CENTER 60.0 MM FROM 1ST END 3.0 MM DEEP 3.2 MM WIDE; 2ND END HOLE THREADS M10X1 |