Part Details | SHOULDERED SHAFT
3040-01-481-6903 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2420529, 1222420529 PIECE 49, 122-2420529 PIECE 49, 3040-01-481-6903, 01-481-6903, 3040014816903, 014816903
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 19, 2001 | 01-481-6903 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-481-6903
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2420529 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 122-2420529 PIECE 49 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-481-6903
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.2488 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.1250 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.1250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 1.5938 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 1.1250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.5938 INCHES NOMINAL |
| OVERALL LENGTH | 3.5313 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | COUNTER BORED ON 2ND END AND THEN CENTER BORED AND TAPPED FOR 0.1250 NPT LUBE FITTING, STRAIGHT, THEN BORED HORIZONTALLY THRU THE SHAFT TO INTERSECT PREVIOUS BORE TO ALLOW FOR LUBRICATION. |
| END ITEM IDENTIFICATION | HRWT DOOR |