Part Details | SHOULDERED SHAFT
3040-01-484-6794 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: H696160214, H696-1602-14, 7067896, 563706789614, 563-7067896-14, 3040-01-484-6794, 01-484-6794, 3040014846794, 014846794
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 04, 2001 | 01-484-6794 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-484-6794
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H696-1602-14 | 96169 | ELECTRIC BOAT CORPORATION |
| 7067896 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 563-7067896-14 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-484-6794
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | NICKEL ALLOY K-500 |
| FIRST END DIAMETER | 2.7560 INCHES MINIMUM AND 2.7580 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 2.4930 INCHES MINIMUM AND 2.4940 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 6.5000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.1360 INCHES MINIMUM AND 2.1410 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 2.4930 INCHES MINIMUM AND 2.4940 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 9 |
| LARGEST STEP DIAMETER | 5.0000 INCHES NOMINAL |
| OVERALL LENGTH | 16.0600 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| END ITEM IDENTIFICATION | VALVE HULL AND BACKUP HOVERING SYSTEM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CRANKSHAFT, VALVE |