Part Details | SHOULDERED AXLE
3040-01-492-6088 An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1554054, 1554053, CVAN657031554054 PN 10, CVAN65-703-1554054 P/N 10, CVAN657031554053 PN 84, CVAN65-703-1554053 P/N 84, 3040-01-492-6088, 01-492-6088, 3040014926088, 014926088
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 05, 2001 | 01-492-6088 | 40525 ( AXLE, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-492-6088
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1554054 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 1554053 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| CVAN65-703-1554054 P/N 10 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| CVAN65-703-1554053 P/N 84 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-492-6088
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-3182 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | PLAIN |
| FIRST END DIAMETER | 3.0000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.8750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.9844 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 3.000 INCHES NOMINAL |
| OVERALL LENGTH | 5.750 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | MATERIAL, STL ALLOY; FIRST END 0.500 X 45 DEGREE BEVEL FOR WELD, LENGTH OF LARGEST STEP FROM FIRST END 2.00 IN. THEN DROPS TO 1.500 IN. DIA, THIS STEP IS 2.7656 IN. LONG THEN DROPS TO THREADED END; BASE OF THREADS ARE UNDERCUT. |
| END ITEM IDENTIFICATION | AIRCRAFT CARRIER CVAN 65; NHA SASS ELEVATORS - LOWER STAGE - STS HATCH COVERS. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GEAR SPINDLE |