Part Details | SHOULDERED SHAFT
3040-01-494-3956 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1716734, 17-1-6734, A36541, A36541, 3040-01-494-3956, 01-494-3956, 3040014943956, 014943956
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 11, 2002 | 01-494-3956 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-494-3956
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 17-1-6734 | 81337 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| A36541 | 41625 | INCOM INTL INCMORSE CONTROLS DIV |
| A36541 | 62809 | MARINE ACQUISITION (US) INCORPORATEDDBA SEASTAR SOLUTIONS |
Technical Data | NSN 3040-01-494-3956
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | COPPER ALLOY 360 |
| FIRST END DIAMETER | 0.2470 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.0980 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.113 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 CIRCULAR GROOVED |
| SECOND END DIAMETER | 0.4330 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0980 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.375 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.312 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL |
| OVERALL LENGTH | 0.656 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | COUNTERSINK IN SECOND END IS 0.210 IN DIA TIMES 90 DEG; THREADS ARE 10-32 UNF; FIRST END IS ROUNDED 45 DEG TIMES 0.030; SECOND END HEAD IS A HEX AND IS ROUNDED 30 DEG |
| END ITEM IDENTIFICATION | 5411-01-436-3326 |