Part Details | SHOULDERED SHAFT
3040-01-496-5198 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: B54111131, B541-1113-1, 59674093261, 596-7409326-1, 5967409326, 596-7409326, 3040-01-496-5198, 01-496-5198, 3040014965198, 014965198
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 18, 2002 | 01-496-5198 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-01-496-5198
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B541-1113-1 | 96169 | ELECTRIC BOAT CORPORATION |
| 596-7409326-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 596-7409326 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-496-5198
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | NICKEL ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM 2 CONDITION HOT FIN,ANNEALED&AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 4.4960 INCHES MINIMUM AND 4.4980 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 1 FLATTED |
| SECOND END GROOVE WIDTH | 0.7500 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 2.1700 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 3.000 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 5.525 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.981 INCHES MINIMUM AND 0.987 INCHES MAXIMUM |
| SECOND END DIAMETER | 2.5000 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 3.000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 6.995 INCHES MINIMUM AND 7.005 INCHES MAXIMUM |
| OVERALL LENGTH | 90.610 INCHES NOMINAL |
| STEP QUANTITY | 13 |
| SPECIAL FEATURES | TOTAL 6 KEY SLOTS, 2 EACH DIAMETRICALLY OPPOSITE ON EACH END AND 2 IN MIDDLE; 5.500-12 UN-2A X 1.880 LONG THREADS ON 1ST END; 2.500-4 UNC-2A X 3.000 LONG INCH THREADS ON 2ND END |
| SPECIFICATION/STANDARD DATA | 81348QQ-N-286 FORM 2 CONDITION HOT FINIHED, ANNEALED AND AGE HARDENED GOVERNMENT SPECIFICATION |
| END ITEM IDENTIFICATION | LDT INTERMEDIATE HATCH OPERATING GEAR ASSEMBLY FOR SEAWOLF CLASS SUBMARINE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,INTERMEDIATE |