Part Details | SHOULDERED SHAFT
3040-01-496-5682 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: B83163003, B831-6300-3, 59674097453, 596-7409745-3, 5967409745, 596-7409745, 3040-01-496-5682, 01-496-5682, 3040014965682, 014965682
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 19, 2002 | 01-496-5682 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-496-5682
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B831-6300-3 | 96169 | ELECTRIC BOAT CORPORATION |
| 596-7409745-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 596-7409745 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-496-5682
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669 TO 1 GRADE 4340 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICRONS |
| FIRST END DIAMETER | 2.2920 INCHES MINIMUM AND 2.3120 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.375 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 2.1078 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.2920 INCHES MINIMUM AND 2.3120 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 36 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.6560 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.8750 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 1.714 INCHES NOMINAL |
| SECOND END DIAMETER | 2.0930 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.714 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.9210 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.1050 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 33 |
| LARGEST STEP DIAMETER | 2.500 INCHES NOMINAL |
| OVERALL LENGTH | 10.275 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| SPECIAL FEATURES | SECOND SHAFT END SPLINE (INVOLUTE) PRESSURE ANGLE 30 DEGREES; FIRST SHAFT END MATES WITH NSN 3020-01-496-5134; NEXT HIGHER ASSEMBLY NSN 3020-01-496-5215 |
| SPECIFICATION/STANDARD DATA | 81349-DOD-F-24669 TO 1 GRADE 4340 GOVERNMENT SPECIFICATION |
| END ITEM IDENTIFICATION | CARGO BAY RAMMER CHAIN SPROCKET BOX USED ON SEAWOLF CLASS SUBMARINE SSN 23 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,SPLINED |