Part Details | SHOULDERED SHAFT
3040-01-498-1149 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: H6921802166, H692-1802-166, 5957067876166, 595-7067876-166, 5957067876, 595-7067876, 3040-01-498-1149, 01-498-1149, 3040014981149, 014981149
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 14, 2002 | 01-498-1149 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-498-1149
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H692-1802-166 | 96169 | ELECTRIC BOAT CORPORATION |
| 595-7067876-166 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 595-7067876 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-498-1149
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | COPPER ALLOY 632 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B150 ALLOY C63200 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | INTERNAL THREADED |
| SECOND END DIAMETER | 0.7370 INCHES MINIMUM AND 0.7390 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 0.560 INCHES MINIMUM |
| LARGEST STEP DIAMETER | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| OVERALL LENGTH | 2.000 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | FIRST SHAFT END HAS FOUR FLATS 90 DEGREE APART ON CIRCUMFERENCE, DIMENSION ACROSS FLATS 0.679 TO 0.681 INCH; 0.125 DIAMETER HOLE CENTERALLY LOCATED ON EACH FLAT (TOTAL FOUR HOLES); FIRST END HAS 0.500 DIAMETER X 0.719 DEEP AXIAL HOLE |
| END ITEM IDENTIFICATION | INTERNAL COUNTERMEASURE LAUNCHER FOR LOS ANGELES CLASS SUBMARINE (688) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GUIDE |