Part Details | SHOULDERED SHAFT
3040-01-498-2568 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3637AS8081, 3637AS808-1, 3637AS808, 3040-01-498-2568, 01-498-2568, 3040014982568, 014982568
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 20, 2002 | 01-498-2568 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TONGUE
TAPERED WITH FLAT
TONGUE
Cross Reference | NSN 3040-01-498-2568
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3637AS808-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| 3637AS808 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 3040-01-498-2568
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643, 17-4PH, COND 1150 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.6220 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.2190 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 1.110 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 TONGUE |
| SECOND END DIAMETER | 0.7470 INCHES NOMINAL |
| SECOND END WIDTH ACROSS FLATS | 0.495 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.495 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.747 INCHES NOMINAL |
| OVERALL LENGTH | 6.200 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | EXPORT CONTROLLED |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| END ITEM IDENTIFICATION | COMMON STORES DOLLY, P/N 3637AS600-1; SPECIAL AIRCRAFT & ENGINE TOOL & SUPPORT EQUIPMENT |