Part Details | SHOULDERED SHAFT
3040-01-499-6682 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: JE13422, JE134-22, JE11538, JE-1153-8, 3040-01-499-6682, 01-499-6682, 3040014996682, 014996682
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 31, 2002 | 01-499-6682 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
WOODRUFF KEYWAY
FLAT KEYWAY
WOODRUFF KEYWAY
Cross Reference | NSN 3040-01-499-6682
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| JE134-22 | 97537 | JUNIPER ELBOW CO. INC.DBA JUNIPER INDUSTRIES |
| JE-1153-8 | 97537 | JUNIPER ELBOW CO. INC.DBA JUNIPER INDUSTRIES |
Technical Data | NSN 3040-01-499-6682
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 FLAT KEYWAY |
| MATERIAL | STEEL COMP 304 |
| FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.750 INCHES NOMINAL |
| FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 WOODRUFF KEYWAY |
| SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.6250 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.625 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL |
| OVERALL LENGTH | 5.5625 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| SPECIAL FEATURES | AFTER CIRCULAR GROOVE, FIRST END HAS 0.6215-0.6230 INCH ACROSS FLATS X 0.6875 LONG SQUARE SHOULDER. SHAFT SECOND END HAS AXIAL AND INTERNAL 0.250 INCH DIA X 1.000 DEEP HOLE AND 0.3125-24UNF-3A X 0.625 LONG THREADS. CENTER OF SHAFT HAS 0.875-7 LEFT HAND, DOUBLE LEAD ACME THREADS WITH PITCH DIA 0.7906-0.8036. MATERIAL HAS MAGNETIC PERMEABILITY OF LESS THAN 2.0 |
| END ITEM IDENTIFICATION | HATCH,WATER TIGHT (W.T.),FLUSH,QUICK ACTING (Q.A.) 24 INCH X 30 INCH 5 PSI JE-1153-8 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | DOG SPINDLE |