Part Details | SHOULDERED AXLE
3040-01-500-0236 An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 75348725, 7534872-5, 5227534872, 522-7534872, 3040-01-500-0236, 01-500-0236, 3040015000236, 015000236
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 12, 2002 | 01-500-0236 | 40525 ( AXLE, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
INTERNAL THREADED
INTERNAL THREADED
Cross Reference | NSN 3040-01-500-0236
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7534872-5 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 522-7534872 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-500-0236
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 316 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, SH, CL316, CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END STYLE | INTERNAL THREADED |
| FIRST END DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 4.533 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | NEXT HIGHER ASSEMBLY: AN/BRD-7 CABLE GUIDE SHEAVE ASSEMBLY REDESIGN; P/N 7534872 |
| END ITEM IDENTIFICATION | MAST ASSEMBLY ESM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT; GUIDE .625 |