Part Details | SHOULDERED SHAFT
3040-01-500-5848 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: H832166414, H832-1664-14, 752706848214, 752-7068482-14, 7527068482, 752-7068482, 3040-01-500-5848, 01-500-5848, 3040015005848, 015005848
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 03, 2002 | 01-500-5848 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-500-5848
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H832-1664-14 | 96169 | ELECTRIC BOAT CORPORATION |
| 752-7068482-14 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 752-7068482 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-500-5848
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 304,CONDITION B FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.4970 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.550 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 PLAIN |
| SECOND END DIAMETER | 0.9960 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| SECOND END WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.690 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM |
| OVERALL LENGTH | 4.370 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | SHAFT IS ECCENTRIC WITH ECCENTRICITY 0.110 INCH AND MARKED ON SECOND END WITH WHITE FILLED PAINT. FIRST END PROVIDED WITH 0.250-20UNC-2BX0.350DEEP MINIMUM FULL THREADS |
| END ITEM IDENTIFICATION | WEAPONS HANDLING RAMMER EXTENSION TRACKS SUB-ASSEMBLY FOR LOS ANGELES CLASS SSN (688) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,ECCENTRIC |